Home | Legals | Sitemap | KIT
Yongbo Deng

Associate Prof. Dr. Yongbo Deng

Karlsruhe Institute of Technology
Institute of Microstructure Technology
Hermann-von-Helmholtz-Platz 1
76344 Eggenstein-Leopoldshafen

Research experience

  • 05/2016 – present, Guest Professor, Micro-NMR Group, Institute of Microstructure Technology (IMT), Karlsruhe Institute of Technology (KIT), Germany
  • 09/2014 –present, Associate professor, Micro and Nano Device Group, State Key Laboratory of Applied Optics (SKLAO), Changchun Institute of Optics, Fine Mechanics and Physics (CIOMP), Chinese Academy of Sciences (CAS)
  • 12/2014 – 03/2015, Scientific staff, Laboratory of Simulation, Department of Microsystems Engineering (IMTEK), University of Freiburg, Germany
  • 07/2012 – 09/2014, Assistant professor, Micro and Nano Device Group, State Key Laboratory of Applied Optics (SKLAO), Changchun Institute of Optics, Fine Mechanics and Physics (CIOMP), Chinese Academy of Sciences (CAS)

 

Education

  • 09/2007 – 05/2012, PhD in mechanical engineering, Changchun Institute of Optics, Fine Mechanics and Physics (CIOMP), Chinese Academy of Sciences (CAS)
  • 09/2003 – 06/2007, BS in mechanical engineering, College of Mechanical Engineering, Qingdao University

 

Research Interests

  • Simulation and optimization in electromagnetics (photonics), hydrodynamics and mechanics
  • Partial differential equation constrained optimization problem and inverse problem, especially topology optimization, shape optimization and optimal control methods
  • Design and manufacture of MEMS devices for microfluidics and photonics
  • Finite element method (Galerkin Finite Element, Mixed Finite Element, Multiscale Finite Element, Vector Finite Element), Homogenization method and Lattice Boltzmann method

 

Academic Service

  • Peer reviewer for international academic journals including
    • MEMS: Lab on a Chip, Journal of Micromechanics and Microengineering, Microsystem Technologies
    • Optics & Photonics: Optics Express, Plasmonics
    • Numerical Simulation and Optimization: Structural and Multidisciplinary Optimization, Communications in Nonlinear Science and Numerical Simulation, Computer Methods in Applied Mechanics and Engineering
  • Senior Member of Chinese Society of Micro-Nano Technology
  • Reviewer of 2015-funding-proposal for National Natural Science Foundation of China

 

Awards

  • Outstanding Graduate Student Award of Chinese Academy of Sciences, 2012
  • Guest Professor Fellowship of Karlsruhe Institute of Technology (KIT), 2016

Selected publications

[1]   Yongbo Deng, Jan G. Korvink, “Topology optimization method for three dimensional electromagnetic waves”, Proceedings of Royal Society A, 2016, 472, 20150835

[2]   Yongbo Deng, Zhenyu Liu, Chao Song, Peng Hao, Yihui Wu, Yongmin Liu, Jan G. Korvink, “Topology optimization of metal nanostructures for localized surface plasmon resonances”, Structural and Multidiciplinary Optimization, 2016, 53, 967-972

[3]   Yongbo Deng, Zhenyu Liu, Chao Song, Junfeng Wu, Yongshun Liu, Yihui Wu, “Topology optimization based computational design methodology for surface plasmon polaritons”, Plasmonics, 2015, 10, 569-583

[4]   Yongbo Deng, Chao Song, Junfeng Wu, Zhenyu Liu, Yihui Wu, “Inverse design of resonant nanostructures for extraordinary optical transmission of periodic metallic slits”, arXiv:1601.00049

[5]   Yongbo Deng, Xing Liu, Zhenyu Liu, Yihui Wu, “Optimal control-based inverse determination of electrode distribution for electroosmotic micromixer”, arXiv:1601.03076

[6]   Yongbo Deng, Jianhua Fan, Song Zhou, Teng Zhou, Junfeng Wu, Yin Li, Ming Xuan, Yihui Wu, “Euler force actuation mechanism for siphon valving in CD-like microfluidic chips”, Biomicrofluidics. 2014, 8, 024101

[7]   Yongbo Deng, Zhenyu Liu, Yongshun Liu, Yihui Wu, “Combination of topology optimization and optimal control method”, Journal of Computational Physics. 2014, 257, 374-399

[8]   Yongbo Deng, Zhenyu Liu, Junfeng Wu, Yihui Wu, “Topology optimization of steady Navier-Stokes flow with body force”, Computer Methods in Applied Mechanics and Engineering. 2013, 255, 306-321

[9]   Yongbo Deng, Zhenyu Liu, Yihui Wu, “Topology optimization of steady and unsteady incompressible Navier-Stokes flows driven by body forces”, Structural and Multidiciplinary Optimization. 2013, 47, 555-570

[10] Yongbo Deng, Ping Zhang, Yongshun Liu, Yihui Wu, Zhenyu Liu, “Optimization of unsteady incompressible Navier-Stokes flow by variational level set method”, International Journal for Numerical Methods in Fluids. 2013, 71(12), 1475-1493

[11] Yongbo Deng, Zhenyu Liu, Ping Zhang, Yongshun Liu, Qingyong Gao, Yihui Wu, “A flexible layout design method for passive micromixers”, Biomedical Microdevices, 2012, 14, 929-945

[12] Yongbo Deng, Zhenyu Liu, Ping Zhang, Yongshun Liu, Yihui Wu, “Topology optimization of unsteady incompressible Navier-Stokes flow”, Journal of Computational Physics, 2011, 230(17), 6688-6708

[13] Yongbo Deng, Yihui Wu, Ming Xuan, Jan. G. Korvink, Zhenyu Liu, “Dynamic optimization of valveless micropump”, Proceedings IEEE International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers), 2011, 442 – 445

[14] Yongbo Deng, Ping Zhang, Xin Du, Yihui Wu, Zhenyu Liu, Yongshun Liu, “Aspect ratio for microchannels with nonuniform surface properties and spontaneous capillary”, Optics and Precision Engineering, 2010, 18(7): 1562-1567, Chinese

[15] Yongbo Deng, Zhenyu Liu, Ping Zhang, Yihui Wu, Jan. G. Korvink, “Optimization of no-moving part fluidic resistance microvalves with low Reynolds number”, Proceedings IEEE International Conference on Micro Electro Mechanical Systems (MEMS), 2010, 67-70

[16] Yongshun Liu, Yongbo Deng, Ping Zhang, Zhenyu Liu, Yihui Wu, “Experimental investigation of passive micromixers conceptual design using the layout optimization method”, Journal of Micromechanics and Microengineering, 2013, 23, 075002

[17] Zhenyu Liu, Yongbo Deng, Sen Lin, Ming Xuan, “Optimization of micro Venturi diode in steady flow at low Reynolds number”, Engineering Optimization. 2012, 44, 1389-1404

[18] Ping Zhang, Yongbo Deng, Yongshun Liu, Yihui Wu, “Design of shrinkage microvalve in microchannel with hydrophilic and hydrophobic walls”, Microsystem Technologies, 2011, 17(9), 1491-1495

[19] Yongshun Liu, Ping Zhang, Yongbo Deng, Peng Hao, Jianhua Fan, Mingbo Chi, Yihui Wu, “Polymeric microlens array fabricated with PDMS mold-based hot embossing”, Journal of Micromechanics and Microengineering, 2014,24, 095028

[20] Jianhua Fan, Yongbo Deng, Ming Xuan, Song Zhou, Junfeng Wu, Yongshun Liu, Yihui Wu, “Research on the pneumatic-pumping metering method in CD-like microfluidic chip for whole blood analysis”, Optics and Precision Engineering, 2014, 22, 2733-2739, Chinese

[21] Jianhua Fan, Yongbo Deng, Ming Xuan, Yongshun Liu, Junfeng Wu, Yihui Wu, “Research on collaborative bonding process of PC microfluidic chip with bonded tendon and solvent”, Optics and Precision Engineering, 2015, 23, 708-713, Chinese

[22] Ping Zhang, Lei Xu, Yongbo Deng, “Study on analysis of dynamic effect in process of stopping capillary by step valve in microchannel”, Optics and Precision Engineering, 2011, 19(12), 2919-2926, Chinese

[23] Yifan Xu, Sen Lin, Yongbo Deng, Zhenyu Liu, “Research on topology optimization design of Tesla-type no-moving-part microvalves”, Computer Simulation, 2014, 31(3), 367-404, Chinese

[24] Teng Zhou, Zhenyu Liu, Yihui Wu, Yongbo Deng, Yongshun Liu, Geng Liu, “Hydrodynamic particle focusing design using fluid-particle interaction”, Biomicrofluidics. 2013, 7, 054104

 

Selected patents (microfluidics)

[1]   Yongbo Deng, Yihui Wu, Jianhua Fan, Song Zhou, “Manufacture and application of Euler-centrifugal CD-like chips used for whole blood analysis”, China, ZL201310442679.5

[2]   Yongbo Deng, Yihui Wu, Jianhua Fan, Song Zhou, “One reagent pre-package method for the CD-like microfluidic chips”, China, ZL201310442705.4

[3]   Yongbo Deng, Yihui Wu, Ping Zhang, Zhenyu Liu, Yongshun Liu, Haiwen Li, “One novel microvalve for double capillaries on microfluidic chip”, China, No. 201010229546.6

[4]   Ping Zhang, Yongbo Deng, Yihui Wu, Zhenyu Liu, Yongshun Liu, Junfeng Wu, “Fluid metering structure with double microchannels on centrifugal microfluidic chip”, China, No. 201010229431.7

[5]   Yihui Wu, Ping Zhang, Yongbo Deng, Haiwen Li, Peng Hao, Zhenyu Liu, Lianghong Hu, “Multifunctional integrated centriugal force driven microfluidic chip”, China, No. 201010230076.5

[6]   Ping Zhang, Lianghong Hu, Yihui Wu, Yongshun Liu, Yongbo Deng, “One novel micromixer on microfluidic chip”, China, No. 200910217810.1