Solar Simulator: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
| ⚫ | |||
| ⚫ | |||
'''Gerätebezeichnung:''' Sun Simulator Messplatz - SUS V2.0 / Oerlikon |
'''Gerätebezeichnung:''' Sun Simulator Messplatz - SUS V2.0 / Oerlikon |
||
| Line 27: | Line 26: | ||
== Manual |
== Manual == |
||
Manual is stored in the labeled cupboard of the Solar Lab 203. |
|||
== How to start the Lamnps == |
|||
b. |
|||
== Tool Responsibles == |
== Tool Responsibles == |
||
| ⚫ | |||
| ⚫ | |||
[[User:Ulrich.Paetzold|Ulrich Paetzold]] |
[[User:Ulrich.Paetzold|Ulrich Paetzold]] |
||
[[User: |
[[User:Efthymios.Klampaftis|Efthymios Klampaftis]] |
||
/ Malte.Langenhorst@kit.edu / Tel. 22193 |
|||
Ulrich Paetzold / Ulrich.Paetzold@kit.edu / Tel. 26357 |
|||
/ Efthymios.Klampaftis@kit.edu / Tel. 22761 |
|||
Revision as of 22:36, 17 August 2017
250px|thumb|right|<Bildunterschrift>-->
Gerätebezeichnung: Sun Simulator Messplatz - SUS V2.0 / Oerlikon
Gerätebezeichnung: Solar Simulator: WXS-90S-L2 by WACOM, Saitama, Japan / Messplatz: Sun Simulator SUS V2.0 / Oerlikon
Geräteverantwortliche/Operateure: Malte Langenhorst, Ulrich Paetzold, Efthymios Klampaftis
Standort: Solar Lab (R203, B301) at the Institute of Microstructure Technology
Kurzbeschreibung
The solar simulator provides illumination approximating natural sunlight. It is a controllable indoor test facility to determine the power conversion efficiency and material stability under standardized conditions mimicking the international solar irradiation standard AM1.5G. It is a commercial solar simulator certified to highest accuracy class named AAA (WXS-90S-L2 by WACOM, Saitama, Japan). The illumination is homogeneous up to areas of 4”, enabling to perform tests on single solar cells as well as thin-film solar modules up to these dimensions. The tool is most in our lab for the testing of solar cells, solar harvesting devices and luminescent materials.
Important rules
a. After switching of the lamps you need to keep the cooling fan running for at least 20 min! Otherwise you will damage the lamps.
b. Lamps can only be exchanged by tool responsibles! Do not touch the optics or inner parts of the solar simulator!
c. Be aware that the lamps operate at high voltages!
d. Always wear personal protection equipment (1) safety goggles (2) clothing w. long sleves (3) gloves
Manual
Manual is stored in the labeled cupboard of the Solar Lab 203.
