Zwicki-Line/english: Difference between revisions
From IMT-Wiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
The <> are placeholder symbols and are not part of the actual syntax command. |
The <> are placeholder symbols and are not part of the actual syntax command. |
||
--> |
--> |
||
[[Datei:zwicki-line.png|links|Text der Bild-Legende]] |
|||
[[File:<File name>|<Display width in pixel>|thumb|right|<Figure caption>]] |
|||
'''Device name:''' |
'''Device name:''' |
||
Zwicki-Line |
|||
'''Operator/Responsible for this device:''' |
'''Operator/Responsible for this device:''' |
||
* [[Benutzer:Hinnerk.Ossmer | Hinnerk Oßmer]] |
|||
* [[Benutzer:Viktor.Pinneker | Viktor Pinneker]] |
|||
* [[Benutzer:Marcel.gueltig | Marcel Gültig]] |
|||
'''Position:''' |
'''Position:''' |
||
Room 212, building 301 |
|||
'''Device designation:''' |
'''Device designation:''' |
||
The Zwicki-Line is a tensile test machine, equipped with force sensors for relatively small forces. |
|||
''' |
'''Specification number:''' |
||
<!-- Designation as per the list of fabrication and measurement devices list, (Fertigungs- und Prüfmittelliste) , e.g. (MI006) --> |
<!-- Designation as per the list of fabrication and measurement devices list, (Fertigungs- und Prüfmittelliste) , e.g. (MI006) --> |
||
== Short Description == |
== Short Description == |
||
The Zwicki-Line is a tensile test machine, equipped with force sensors for relatively small forces. |
|||
== Alternatives == |
== Alternatives == |
||
There is an Instron tensile test machine in the basement of building 307 (contact: Mr. Dingelreiter), equipped with a temperature chamber. It is less suited for small samples. |
|||
Are there other devices at IMT with the same or a similar application? Please name them and their differences or similarities, and link them here. YOu can find the correct link name in the [[Prüfmittel_Liste_-_List_of_Measurement_Devices| list of measurement devices]] or in the [[Liste der Fertigungsmittel - List of Manufacturing Equipment| list of fabrication devices]]. |
|||
== Device Specifications == |
== Device Specifications == |
||
* 50 N sensor with 1% accuracy |
|||
(Additional) equipment and functions, e.g. process gasses, wavelengths, resolution, smallest achievable feature size |
|||
* 5 Nsensor with 1% accuracy |
|||
(Zusätzliche) Ausstattung und Funktionen, z.B. Prozessgase, Wellenlängen, Auflösung, Strukturdimensionen |
|||
* Exchangable clamping jaws (napped metal or Vulkollan) |
|||
* Data acquisition via sofware "TestExpert II" - enables specification of of load programs, cyclic loading etc. |
|||
== Established Processes == |
== Established Processes == |
||
Which processes have been compelted successfully with this device, what materials have been structured, testet or processed? |
|||
Please don't enter any process parameters and sensible details into the wiki, but add the path to J: network drive where the detaisl are described or link a user who knows about the process. |
|||
== Restrictions == |
== Restrictions == |
||
What can not and/or should not be done with the device, i.e. are there materials that could impair the performance of the device if they are structured with, e.g. nickel inside the RIE? Are there other precautions that have to be taken for sample preparation? |
|||
| ⚫ | |||
Persons who have recieved an instruction and thus are allowed to operate the device. |
|||
Please create a list and link them to the user profiles: |
|||
* [[Benutzer:Vorname.Nachname | Nachname, Vorname]] |
|||
| ⚫ | |||
* [[Benutzer:Hinnerk.Ossmer | Hinnerk Oßmer]] |
|||
* [[Benutzer:Viktor.Pinneker | Viktor Pinneker]] |
|||
* [[Benutzer:Marcel.gueltig | Marcel Gültig]] |
|||
* [[Benutzer:Ruizhi.Yin | Ruizhi Yin]] |
|||
Revision as of 16:21, 17 May 2013
Device name:
Zwicki-Line
Operator/Responsible for this device:
Position: Room 212, building 301
Device designation: The Zwicki-Line is a tensile test machine, equipped with force sensors for relatively small forces.
Specification number:
Short Description
The Zwicki-Line is a tensile test machine, equipped with force sensors for relatively small forces.
Alternatives
There is an Instron tensile test machine in the basement of building 307 (contact: Mr. Dingelreiter), equipped with a temperature chamber. It is less suited for small samples.
Device Specifications
- 50 N sensor with 1% accuracy
- 5 Nsensor with 1% accuracy
- Exchangable clamping jaws (napped metal or Vulkollan)
- Data acquisition via sofware "TestExpert II" - enables specification of of load programs, cyclic loading etc.
