Home | Legals | Data Protection | Sitemap | KIT

Seminar Archive

2018 | 2017 | 2016 | 2015 | 2014 | 2013

IMT seminar "Aktuelle Arbeiten auf dem Gebiet der Mikrosystemtechnik"

Recent research projects in microsystems technology

Prof. Dr. Jan G. Korvink, Prof. Dr. Manfred Kohl

 

Location: KIT Campus North, Institute of Microstructure Technology, Building 301, Room 405

Time: Tuesdays 3 p.m.

External attendees of the seminar are asked to register at the main gate of KIT Campus North. Please have your valid identity card or passport with you. Keep yourself informed about potential changes of the seminar program by calling the secretariat.

 

18.12.2018  

Entwicklung effizienter Algorithmen zur Analyse von 3D-Lidar-Daten für Erkennung statischer und dynamischer Objekte aus der Fahrzeugumgebung
Frau Leyan Gu (IMT)

13.12.2018  

Extra seminar on Thursday, 13.12.2018 at 11.00 h

Carbon based neural probes used for high-resolution neurotransmitter detection
Surabhi Nimbalkar (San Diego State University)

11.12.2018  

Entwicklung eines bistabilen Wippenmechanismus auf Basis von Formgedächtnisaktoren
Kerstin Kirchgässner (IMT)

Entwicklung eines multistabilen Linearaktorsystems auf Basis von Formgedächtnislegierungen
Ina Kohlschreiber (IMT)

6.12.2018  

Extra seminar on Thursday, 6.12.2018 at 14.00 h

Stabilization of high aspect-ratio x-ray gratings for differential phase contrast imaging
Philipp Riederer (Chair of Biomedical Physics, TU Munich, Dept. of Physics)

5.12.2018  

Extra seminar on Wednesday, 5.12.2018 at 16.00 h

Nano-Anatomy of Molecular Reactions: Chemical bond imaging by atomic force microscopy
Prof. André Schirmeisen (University of Giessen)

4.12.2018  

Realisierung einer fluidischen Plattform für Life-Science Anwendungen
Lea Menken (IMT)

13.11.2018  

Convective transport in Microfluidics: Convection and timing control of particles in micro-channel flows using dielectrophoretic force
Prof. Dr. Kazuya TATSUMI (Kyoto University, Department of Mechanical Engineering and Science)

23.10.2018  

FPC@DCU - Microfluidics-Enabled “Fit-for-Industry” Solutions for the Life Sciences with the Centrifugal Microfluidic “Lab-on-a-Disc” Platform
Prof. Dr. Jens Ducrée (DCU, Dublin City University, Ireland)

9.10.2018  

Capillary Suspensions with Polymeric Bridges
PHD cand. Katharina Hauf (KIT-CS)

2.10.2018  

Extra seminar on Tuesday, 2.10.2018 at 10.15 h

Complex optics of biophotonic displays
Dr. Bodo Wilts (Adolphe Merkle Institute, Fribourg, Switzerland)

2.10.2018  

Regular seminar on Tuesday, 2.10.2018 at 15.00 h

Electrochemical evaluation of active materials for lithium-ion batteries by single particle measurement
Prof. Hirokazu Munakata (Tokyo Metropolitan University, Japan)

11.9.2018  

Energy Harvesting für drahtlose Sensormodule
Wenlong Ma (IMT)

6.8.2018  

Extra seminar on Monday, 6.8.2018 at 10.30 h

Development of an electromagnetic artifical muscle - The EMAM
Rohi Shalati

31.7.2018  

Sondertermin am Dienstag, dem 31.7.2018 um 13.30 Uhr

Gruppenvorträge der Studenten zu den Ergebnissen aus dem Praktikum "Hands-on BioMEMS"

1. Biosensorik: Entwicklung und Aufbau eines pH-Sensors für mikrofluidische Anwendungen in den Life Sciences

2. Point of Care: Point of Care Diagnostik chronisch-entzündlicher Darmerkrankungen - Konzept für ein mikrofluidisches Testsystem

3. Point of Care: Entwicklung eines Point-of-Care Tests zur Früherkennung eines Vitamin B12 Mangels

4. Organ-on-Chip: Multiorgan on Chip: Entwicklung einer Vakuumkammer zur Nachahmung der Darmperistaltik

17.7.2018  

Novel 2D-Scalable Braille Module using Swing-up Pin Motion for Portable Braille Devices
Hanbyeol Kim

10.7.2018  

Extra seminar on Tuesday, 10.7.2018 at 10.00 h

Rapid Prototyping – Gießen von mikrostrukturierten Formwerkzeugen
Felix Hermann

3.7.2018  

Neural Networks for Steady-State Fluid Flow Prediction
Jannik Zürn

Aufbau und Prozessoptimierung einer Produktion von Formgedächtnisfolienaktoren
Johannes Zehntner

4.6.2018  

Extra seminar on Monday, 4.6.2018 at 15.00 h

The Secret of Sacred Lotus: Functional Surfaces for Technical Innovations from the Biological Diversity
Prof. Barthlott (Nees Institute, Bonn)

29.5.2018  

Extra seminar on Tuesday, 29.5.2018 at 10.00 h

Dynamical Mechanical Properties of Polyvinylbutyral Nanocomposites
Prof. Dr. Sergio Pezzin (University of Santa Catarina, Brazil)

29.5.2018  

Regular seminar on Tuesday, 29.5.2018 at 15.00 h

Development of novel instruments for high resolution microscopy to measure mechanical and electrical parameters of biological nano-systems
Prof. Dr. Tilman Schäffer (Universität Tübingen)

17.5.2018  

Extra seminar on Thursday, 17.5.2018 at 10.30 h

Structured Surfaces as Key Elements for Energy Efficiency: Lubricant-Infused Nanowrinkled Surfaces
Prof. Chiara Neto (University of Sydney)

8.5.2018  

Solvent Triggered Self-folding Behavior of Biopolymer Films
Frau Dr. Amrita Rath (Indian Institute of Technology Madras, India)

8.5.2018  

Extra seminar on Tuesday, 8.5.2018 at 11.00 h

A fast electrochemical assay for fibrinogen targeted for emergency room settings
Martin Langer

17.4.2018  

Combining adaptive with high throughput nano manufacturing techniques for the production of dynamic surfaces
Dr. Nikos Kehagias (Catalan Institute of Nanoscience and Nanotechnology, Bellaterra, Spain)

6.3.2018  

Solving the environmental issues for cells: Towards precise regulation of stem cell functions
Assoc. Prof. Ken-ichiro Kamei (Univ. Kyoto)

2.3.2018  

Extra seminar on Friday, 2.3.2018 at 15.00 h

Hardware developments and applications in very high field and very low field magnetic resonance
Prof. Dr. Andrew G. Webb (LUMC, NL)

13.2.2018  

Radical-Based Systems: Chemical Reactivity, Spectroscopy, and Utilization
Univ.-Prof. Mag.rer.nat. Dr.phil. Georg Gescheidt-Demner (Technische Universität Graz)

NMR meets Photochemistry: Projects, Problems and some Solutions
Eduard Stadler (Technische Universität Graz)

6.2.2018  

Entwicklung von Protokollen zur lithographischen Oberflächenmodifikation von Cellulose
Ying Zhang (IMT)

Zwei Abschlusspräsentationen des Praktikums „MST Produktdesign für junge Unternehmer“
Organisator Dario Mager

16.1.2018  

Entwicklung eines Miniatur-Schieber- und Quetschventils auf Basis von Formgedächtnisaktoren
Michael Löffler (IMT)

Nachbehandlung lasergeschnittener NiTi-Mikroaktoren
Georg Scholl