Entwicklung effizienter Algorithmen zur Analyse von 3D-Lidar-Daten für Erkennung statischer und dynamischer Objekte aus der Fahrzeugumgebung
Frau Leyan Gu (IMT)

Extra seminar on Thursday, 13.12.2018 at 11.00 h

Carbon based neural probes used for high-resolution neurotransmitter detection
Surabhi Nimbalkar (San Diego State University)

Entwicklung eines bistabilen Wippenmechanismus auf Basis von Formgedächtnisaktoren
Kerstin Kirchgässner (IMT)

Entwicklung eines multistabilen Linearaktorsystems auf Basis von Formgedächtnislegierungen
Ina Kohlschreiber (IMT)

Extra seminar on Thursday, 6.12.2018 at 14.00 h

Stabilization of high aspect-ratio x-ray gratings for differential phase contrast imaging
Philipp Riederer (Chair of Biomedical Physics, TU Munich, Dept. of Physics)

Extra seminar on Wednesday, 5.12.2018 at 16.00 h

Nano-Anatomy of Molecular Reactions: Chemical bond imaging by atomic force microscopy
Prof. André Schirmeisen (University of Giessen)

Realisierung einer fluidischen Plattform für Life-Science Anwendungen
Lea Menken (IMT)

Convective transport in Microfluidics: Convection and timing control of particles in micro-channel flows using dielectrophoretic force
Prof. Dr. Kazuya TATSUMI (Kyoto University, Department of Mechanical Engineering and Science)

FPC@DCU - Microfluidics-Enabled “Fit-for-Industry” Solutions for the Life Sciences with the Centrifugal Microfluidic “Lab-on-a-Disc” Platform
Prof. Dr. Jens Ducrée (DCU, Dublin City University, Ireland)

Capillary Suspensions with Polymeric Bridges
PHD cand. Katharina Hauf (KIT-CS)

Extra seminar on Tuesday, 2.10.2018 at 10.15 h

Complex optics of biophotonic displays
Dr. Bodo Wilts (Adolphe Merkle Institute, Fribourg, Switzerland)

Regular seminar on Tuesday, 2.10.2018 at 15.00 h

Electrochemical evaluation of active materials for lithium-ion batteries by single particle measurement
Prof. Hirokazu Munakata (Tokyo Metropolitan University, Japan)

Energy Harvesting für drahtlose Sensormodule
Wenlong Ma (IMT)

Extra seminar on Monday, 6.8.2018 at 10.30 h

Development of an electromagnetic artifical muscle - The EMAM
Rohi Shalati

Sondertermin am Dienstag, dem 31.7.2018 um 13.30 Uhr

Gruppenvorträge der Studenten zu den Ergebnissen aus dem Praktikum "Hands-on BioMEMS"

1. Biosensorik: Entwicklung und Aufbau eines pH-Sensors für mikrofluidische Anwendungen in den Life Sciences

2. Point of Care: Point of Care Diagnostik chronisch-entzündlicher Darmerkrankungen - Konzept für ein mikrofluidisches Testsystem

3. Point of Care: Entwicklung eines Point-of-Care Tests zur Früherkennung eines Vitamin B12 Mangels

4. Organ-on-Chip: Multiorgan on Chip: Entwicklung einer Vakuumkammer zur Nachahmung der Darmperistaltik

Novel 2D-Scalable Braille Module using Swing-up Pin Motion for Portable Braille Devices
Hanbyeol Kim

Extra seminar on Tuesday, 10.7.2018 at 10.00 h

Rapid Prototyping – Gießen von mikrostrukturierten Formwerkzeugen
Felix Hermann

Neural Networks for Steady-State Fluid Flow Prediction
Jannik Zürn

Aufbau und Prozessoptimierung einer Produktion von Formgedächtnisfolienaktoren
Johannes Zehntner

Extra seminar on Monday, 4.6.2018 at 15.00 h

The Secret of Sacred Lotus: Functional Surfaces for Technical Innovations from the Biological Diversity
Prof. Barthlott (Nees Institute, Bonn)

Extra seminar on Tuesday, 29.5.2018 at 10.00 h

Dynamical Mechanical Properties of Polyvinylbutyral Nanocomposites
Prof. Dr. Sergio Pezzin (University of Santa Catarina, Brazil)

Regular seminar on Tuesday, 29.5.2018 at 15.00 h

Development of novel instruments for high resolution microscopy to measure mechanical and electrical parameters of biological nano-systems
Prof. Dr. Tilman Schäffer (Universität Tübingen)

Extra seminar on Thursday, 17.5.2018 at 10.30 h

Structured Surfaces as Key Elements for Energy Efficiency: Lubricant-Infused Nanowrinkled Surfaces
Prof. Chiara Neto (University of Sydney)

Solvent Triggered Self-folding Behavior of Biopolymer Films
Frau Dr. Amrita Rath (Indian Institute of Technology Madras, India)

Extra seminar on Tuesday, 8.5.2018 at 11.00 h

A fast electrochemical assay for fibrinogen targeted for emergency room settings
Martin Langer

Combining adaptive with high throughput nano manufacturing techniques for the production of dynamic surfaces
Dr. Nikos Kehagias (Catalan Institute of Nanoscience and Nanotechnology, Bellaterra, Spain)

Solving the environmental issues for cells: Towards precise regulation of stem cell functions
Assoc. Prof. Ken-ichiro Kamei (Univ. Kyoto)

Extra seminar on Friday, 2.3.2018 at 15.00 h

Hardware developments and applications in very high field and very low field magnetic resonance
Prof. Dr. Andrew G. Webb (LUMC, NL)

Radical-Based Systems: Chemical Reactivity, Spectroscopy, and Utilization
Univ.-Prof. Mag.rer.nat. Dr.phil. Georg Gescheidt-Demner (Technische Universität Graz)

NMR meets Photochemistry: Projects, Problems and some Solutions
Eduard Stadler (Technische Universität Graz)

Entwicklung von Protokollen zur lithographischen Oberflächenmodifikation von Cellulose
Ying Zhang (IMT)

Zwei Abschlusspräsentationen des Praktikums „MST Produktdesign für junge Unternehmer“
Organisator Dario Mager

Entwicklung eines Miniatur-Schieber- und Quetschventils auf Basis von Formgedächtnisaktoren
Michael Löffler (IMT)

Nachbehandlung lasergeschnittener NiTi-Mikroaktoren
Georg Scholl